UltraDiag Moto Professional Motorcycle Diagnostic Scanner

The UltraDiag Moto Professional Motorcycle Diagnostic Scanner is designed for motorcycle technicians, powersports mechanics, and repair workshops. It provides full-system diagnostics, bidirectional active testing, and advanced maintenance functions for compatible motorcycles, ATVs, UTVs, and side-by-side vehicles.

This professional motorcycle diagnostic scanner features an 8-inch touchscreen, Bluetooth communication, and coverage for 81 vehicle makes. Moreover, it includes 29 service functions and selected calibration capabilities.

As a result, technicians can identify vehicle faults, inspect electronic systems, and complete supported maintenance procedures using one portable diagnostic device.

Key Features of UltraDiag Moto

• 8-Inch Touchscreen: Displays diagnostic menus, fault codes, and live vehicle data.
• 81 Vehicle Makes: Supports compatible motorcycles and powersports vehicles.
• Full-System Diagnostics: Reads and clears diagnostic trouble codes from supported electronic control modules.
• 29 Maintenance Functions: Provides routine service resets and selected calibration procedures.
• Bidirectional Active Testing: Activates compatible electronic components during troubleshooting.
• Advanced Calibration: Supports selected sensor adjustments and system learning procedures.
• Vehicle Customization: Allows compatible electronic settings to be adjusted.
• Bluetooth 5.0 Communication: Enables wireless diagnostics through the vehicle communication interface.
• Diagnostic Connector Guide: Helps technicians locate supported vehicle diagnostic ports.
• Live Data Monitoring: Displays available sensor information during vehicle inspections.
• Android 11 Operating System: Supports diagnostic applications and navigation.
• 10,000mAh Battery: Provides portable power for workshop use.
• One Year of Software Updates: Includes diagnostic software updates for the initial year.

Professional Motorcycle Diagnostic Scanner Functions

The UltraDiag Moto provides comprehensive diagnostic capabilities for compatible motorcycles and powersports vehicles.

First, technicians can read and clear diagnostic trouble codes. Next, they can review live sensor readings and retrieve electronic control unit information.

Additionally, the scanner supports electronic system inspections and selected active testing procedures.

Its diagnostic functions include:

• Reading Diagnostic Trouble Codes
• Clearing Diagnostic Trouble Codes
• Viewing Live Sensor Data
• Retrieving ECU Information
• Checking Electronic System Status
• Reviewing Diagnostic Results
• Performing Supported Active Tests

Therefore, technicians can investigate electronic faults and evaluate vehicle conditions.

However, available functions depend on the vehicle manufacturer, model, year, and electronic system.

Motorcycle, ATV, and UTV Diagnostics

The UltraDiag Moto supports diagnostics for a wide range of powersports vehicles.

Its coverage includes compatible motorcycles, all-terrain vehicles, utility task vehicles, and side-by-side models.

Moreover, the diagnostic adapter cable set supports different vehicle connector configurations.

This makes the scanner suitable for workshops that service multiple powersports vehicle types.

29 Motorcycle Maintenance Functions

The UltraDiag Moto includes 29 maintenance functions for supported vehicles.

These functions help mechanics perform routine servicing and selected system adjustments.

Examples of available procedures include:

• Oil Service Reset
• Idle Speed Adjustment
• Throttle Position Sensor Reset
• ABS Bleeding
• Clutch Initialization Learning
• ECU Reset
• Battery Management Reset
• Tire Pressure Monitoring Reset
• Air-Fuel Ratio Reset
• Selected Electronic System Calibrations

Furthermore, additional service functions may be available for specific vehicle models.

Therefore, technicians can complete various maintenance tasks through one diagnostic platform.

Bidirectional Active Testing

The UltraDiag Moto supports bidirectional controls for compatible electronic systems.

This feature allows technicians to send commands to selected motorcycle components.

For example, supported active tests may include:

• Fuel Injector Activation
• Throttle Valve Testing
• Cooling Fan Operation
• Compatible Actuator Testing

Additionally, technicians can observe component responses during testing.

As a result, bidirectional controls help investigate faults without relying only on stored diagnostic codes.

Advanced Motorcycle Calibration

The UltraDiag Moto provides selected calibration functions for compatible motorcycles.

These functions assist technicians with adjustments following maintenance or component replacement.

For example, supported procedures may include idle speed calibration, cruise control adjustments, and angle sensor calibration.

Moreover, the diagnostic menus help users access available vehicle-specific procedures.

However, calibration functions vary by motorcycle model and year.

Motorcycle Customization Functions

The UltraDiag Moto supports selected electronic configuration and personalization functions.

These capabilities allow technicians to adjust compatible vehicle settings.

Additionally, some supported systems allow electronic features to be enabled, disabled, or configured.

However, customization availability depends on the motorcycle manufacturer and electronic control system.

Bluetooth Wireless Diagnostics

The UltraDiag Moto uses a Bluetooth vehicle communication interface.

This wireless connection allows the diagnostic tablet to communicate with compatible motorcycles without a direct tablet-to-vehicle cable.

Therefore, technicians can move around the vehicle while reviewing diagnostic information.

Moreover, Bluetooth communication supports convenient workshop operation.

Diagnostic Connector Location Guide

The UltraDiag Moto includes a diagnostic connector location guide.

This feature helps technicians identify supported vehicle diagnostic port locations.

Additionally, the included adapter cables support different motorcycle connection types.

As a result, users can select the appropriate diagnostic connection for compatible vehicles.

Live Data Monitoring

The UltraDiag Moto displays live vehicle sensor information for supported electronic systems.

Technicians can review available sensor readings while investigating vehicle performance issues.

Moreover, live data monitoring helps identify unusual electronic system behavior.

This feature supports more detailed motorcycle diagnostics.

Display and Hardware Performance

The UltraDiag Moto features an 8-inch touchscreen with 1280 × 800 resolution.

Its 4-core 1.8GHz processor supports diagnostic applications and menu navigation.

Additionally, the device includes 2GB RAM and 32GB internal storage.

The Android 11 operating system provides the software environment for diagnostic functions.

Battery and Connectivity

The UltraDiag Moto includes a 10,000mAh rechargeable battery.

This battery supports portable diagnostic operation during vehicle inspections.

Moreover, dual-band Wi-Fi supports 2.4GHz and 5GHz networks for compatible online features and software updates.

The scanner also includes a 5MP rear camera.

UltraDiag Moto Technical Specifications

Package Contents

The UltraDiag Moto diagnostic package includes:

• UltraDiag Moto Diagnostic Tablet
• Wireless Vehicle Communication Interface
• 3-in-1 Power Adapter
• USB Type-A to USB-C Cable
• Quick User Guide
• Carrying Case
• Motorcycle Diagnostic Adapter Cable Set

The adapter set supports different compatible motorcycle and powersports diagnostic connectors.

Software Updates and Vehicle Compatibility

The UltraDiag Moto includes one year of diagnostic software updates.

Users can install available software updates through the supported Wi-Fi update function.

After the included period, continued software updates may require renewal under the applicable subscription terms.

Furthermore, diagnostic coverage and maintenance functions depend on the vehicle manufacturer, model, year, and electronic system configuration.

Technicians should confirm vehicle compatibility before performing advanced diagnostic procedures.

Why Choose the UltraDiag Moto Diagnostic Scanner?

The UltraDiag Moto Professional Motorcycle Diagnostic Scanner combines full-system diagnostics with practical maintenance and calibration capabilities.

Its bidirectional controls help technicians test compatible electronic components. Moreover, Bluetooth communication supports convenient operation during motorcycle inspections.

With 29 maintenance functions, support for 81 vehicle makes, and an 8-inch touchscreen, the UltraDiag Moto provides a versatile diagnostic solution for motorcycle and powersports repair workshops.