Access 3 Backpacking Tent 3-Person Freestanding 3-4 Season Shelter

Access 3 Backpacking Tent provides sleeping space for three people in a freestanding design. It supports 3–4-season backpacking use. In addition, the tent uses an Easton Syclone composite pole system and provides two doors.

𝗧𝗵𝗿𝗲𝗲-𝗣𝗲𝗿𝘀𝗼𝗻 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆

The tent has a listed sleeping capacity of three people. Its floor measures 84 x 70 inches.

In addition, the interior provides 41 square feet of floor area. Therefore, users can check these measurements against their sleeping setup before a trip.

𝟯–𝟰-𝗦𝗲𝗮𝘀𝗼𝗻 𝗗𝗲𝘀𝗶𝗴𝗻

The tent supports 3–4-season backpacking use. In addition, the tent body uses limited mesh coverage.

Therefore, the design reduces the amount of open mesh compared with tents that use extensive mesh panels.

𝗙𝗿𝗲𝗲𝘀𝘁𝗮𝗻𝗱𝗶𝗻𝗴 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲

The tent uses a freestanding construction. In addition, multiple guyout points support the intended setup.

Users should follow the supplied setup instructions when positioning and securing the tent.

𝗘𝗮𝘀𝘁𝗼𝗻 𝗦𝘆𝗰𝗹𝗼𝗻𝗲 𝗣𝗼𝗹𝗲

A unified and hubbed Easton Syclone composite pole supports the tent. The supplied specifications list one primary pole system.

In addition, the pole has a listed diameter of 9.3 mm.

𝗧𝘄𝗼 𝗗𝗼𝗼𝗿𝘀

Two doors provide separate entry points. Therefore, occupants can access the interior from either listed doorway.

In addition, this layout supports a three-person sleeping configuration.

𝗩𝗲𝘀𝘁𝗶𝗯𝘂𝗹𝗲 𝗔𝗿𝗲𝗮

The tent provides 17.5 square feet of listed vestibule area. In addition, the hooped vestibule includes snow flaps.

Therefore, the vestibule provides covered space outside the main sleeping area for compatible equipment.

𝗥𝗮𝗶𝗻𝗳𝗹𝘆

The rainfly uses 20-denier ripstop nylon. In addition, it has a listed 1,200 mm Xtreme Shield polyurethane and silicone coating.

Rainfly vents also provide airflow through the shelter system.

𝗙𝗹𝗼𝗼𝗿 𝗖𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻

The floor uses 30-denier ripstop nylon. It also has a listed 3,000 mm Xtreme Shield polyurethane coating and DWR treatment.

Meanwhile, the supplied configuration does not include a footprint. Users should treat a compatible footprint as a separate accessory.

𝗖𝗮𝗻𝗼𝗽𝘆 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀

The canopy combines 20-denier ripstop nylon with 10-denier micromesh polyester.

In addition, the limited mesh configuration forms part of the tent body design.

𝟰𝟳-𝗜𝗻𝗰𝗵 𝗣𝗲𝗮𝗸 𝗛𝗲𝗶𝗴𝗵𝘁

The tent has a listed peak height of 47 inches. Meanwhile, its floor measures 84 x 70 inches.

Therefore, users can compare the interior measurements with their space requirements before use.

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝗹 𝗦𝘁𝗼𝗿𝗮𝗴𝗲

Two internal pockets provide storage for smaller items. As a result, users can keep compatible personal items inside the sleeping area.

The pockets also separate smaller gear from the main floor space.

𝗣𝗮𝗰𝗸𝗲𝗱 𝗦𝗶𝘇𝗲 𝗮𝗻𝗱 𝗪𝗲𝗶𝗴𝗵𝘁

The minimum trail weight is 4 lb 6 oz. Meanwhile, the listed packaged weight is 5 lb 1 oz.

In addition, the packed dimensions measure 7 x 21 inches.

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀

Product Type: Backpacking Tent
Model: Access 3
Sleeping Capacity: 3 People
Season Rating: 3–4 Season
Design: Freestanding
Minimum Trail Weight: 4 lb 6 oz
Packaged Weight: 5 lb 1 oz
Packed Size: 7 x 21 Inches
Floor Dimensions: 84 x 70 Inches
Floor Area: 41 Sq. Ft.
Vestibule Area: 17.5 Sq. Ft.
Peak Height: 47 Inches
Doors: 2
Internal Pockets: 2
Pole System: 1 Unified Hubbed Pole
Pole Material: Easton Syclone Composite
Pole Diameter: 9.3 mm
Canopy: 20D Ripstop Nylon / 10D Micromesh Polyester
Floor: 30D Ripstop Nylon
Floor Coating: 3,000 mm Xtreme Shield PU and DWR
Rainfly: 20D Ripstop Nylon
Rainfly Coating: 1,200 mm Xtreme Shield PU / Silicone
Footprint Included: No